Arnold fixed my mousepad charger!!

Ahfroman you eediot! De solution to any prahblem is more POWAH!

You had to pahmp up your sirrcuit like this. Do naht use USB and shitty transeestuhs!

Me and mein homies stormed Fairchild Semiconductah's headquartas, killed 2300 employees, and stole some transistahs.

Dey aren't neurahl net prahcessas, but they switch 75A chust fine. But if you do not heatsink them prahperly you will end ahp vith liquid metal. I hate dat.

I used my feest and punched a dent into Ahfroman's mousepad. I bit some netwarking cable in half and glued it to de pad.

I cut open my face and pulled out an inductah and a diode. It fit into de mouse's ass purfectly.

And I used a powah supply I took frahm de wreckage in Cyberdyne Seestems labs.

Infeoosed with ARNOLD powah, de mousepad was capable of running de mouse vithout batteries.


Now I checked to see if it could chaahge batteries. I dischaaged 2 NiMH batteries until de mouse stopped verking.


Then I tried chahging dem with de pad for an owah...

Resahlts:


Safetymahk 2003: No worse dan using your subwoofah for a footrest.
The only prahblem is that the pad coil got so haht it melted de glue and stuck to de floor. Now excewse me im going to fahk some beautiful vimen.

I wish casio would put this stuff in their camera watches... I hate replacing batteries.